So the black wire from your fan goes to the hot wire through supply in the white wire from your fan goes to the neutral wire that you are supply. Turn off power to the outlet that requires a ground.
The box could overheat and start a fire or someone could get a shock from touching it.
How to ground an outlet with only 2 wires.
Dont ground to the electrical box.
Connecting the ground wire to a metal electrical box will energize the box in the event of a short circuit.
Note that if the.
If the wires are not in armored cable you cannot ground them according to code.
Use the gfci as detailed above.
How to ground a 2 wire outlet properly.
2 wire no ground electrical outlet wiring how to wire an electrical plug outlet or wall plug when no ground wire is present or how to add a grounding conductor.
Test the outlet by inserting the leads of the voltage tester into the outlet slots.
Post a question or comment about how to install and wire electrical outlets or receptacles in buildings.
If thats the case you may need to add a ground to comply with both safety and the manufacturers installation instructions.
Dont rely on metal sheathing or an exposed ground wire.
The concern is to bond the new ground wires together but not exceed the box fill capacity.
It sounds as if youre missing a ground wire.
Grounding old 2 wire outlets ryan as long as the ground wires will be spliced together and the junction box has the cubic inch capacity for all the wires then this should be ok.
In other cases two wire circuits without gfci protection can be replaced with two prong receptacles that can ground if you bond the grounding to any locations including an electrode system conductor panelboard equipment grounding terminal or a grounded service conductor.
Pull the outlet out of the box.
Remove the screws holding the outlet to the wiring box.
No comments:
Post a Comment