Forcing the grout deep into the grout lines will ensure that there is good coverage of grout in all of the grout lines. Apply the grout with a rubber float and force the grout deep into all of the grout lines.
I hope you enjoy this video and it helps you with your future projects.
How to grout a shower wall.
Take care not drag any grout from the tiles.
After grouting ceramic tile make sure to seal tile grout to prevent water from penetrating through.
Ensure that the whole shower is dry before applying new grout since applying it on a wet surface compromises its quality.
All you need is grout water and a grout float.
Remember grout is not water proof and you really need to apply a grout sealer.
Once the grout has slightly hardened use a grout shaper to finish off the joints for a neat finish.
Use a grout shaper to finish off the joints.
When youve finished putting the new grout on go over the tiles with a damp sponge to remove any excess.
Wait about 20 minutes before cleaning off the grout residue with a grout sponge do not use a standard kitchen sponge which has sharp edges and corners that pulls the grout out of the joints.
Now its time to grout and seal the shower.
Mix some grout with water to create a paste with medium consistency then press it in parts on the regions between the tiles.
Only apply grout to one small wall at a time.
Grouting shower floors and walls is easy to do.
Ensure you obtain a consistency similar to that of peanut butter.
Dunk the sponge into a bucket of clean hot water then wring it out until it is almost dry.
/grout-being-applied-to-tiles-using-a-grout-spreader-81992491-582b44cb3df78c6f6aa728e4.jpg)
No comments:
Post a Comment